How to Grow & Care for Lithops (the Living Stone)

Lithops look enough like pebbles that grazing animals walk right past them in the deserts of southern Africa.

Each plant is just a pair of fat leaves split down the middle, and once a year a fresh pair grows inside the old one. Most lithops deaths come from watering at the wrong point in that cycle, and the calendar is easy to learn.

Ten popular species, the yearly watering rhythm and simple propagation all follow.

Common Name Living Stones, Pebble Plants
Botanical Name Lithops spp.
Family Aizoaceae
History & Origin Native to southern Africa
Plant Type Succulent, Perennial
Mature Size Up to 1 inch tall, 1-2 inches wide
Sun Exposure Bright light with at least 4–5 hours of direct sun
Soil Type Well-draining, sandy or gritty mix
Soil pH Neutral to slightly acidic
Temperature 50–90°F (10–32°C); protect from frost
Watering Mainly in fall; none in winter; very little in summer
Fertilizing Half-strength cactus fertilizer once a year, if at all
Bloom Time Fall
Flower Color Yellow, white, orange, or pink
Hardiness Zone Zones 10–11 outdoors, in dry, frost-free climates
Toxicity Non-toxic to pets and humans
Common Problems Overwatering, rot, pests like mealybugs

Varieties of Lithops

Lithops aucampiae

Lithops aucampiae has rusty red-brown to golden tops covered in dark, branching lines. It’s one of the larger and more forgiving species, and its bright yellow flowers appear in fall.

Lithops bromfieldii

Shades of brown, red and gray mark Lithops bromfieldii, with deeply etched patterns across the flat tops. Clumps form readily over time, and the flowers are yellow.

Lithops dorotheae

Lithops dorotheae has pale yellow-green tops scribbled with dark red lines and dots, among the most striking patterns in the genus. Native to a tiny area of South Africa, it’s protected in the wild and grown widely from seed.

Lithops fulviceps

Warm tones of tan, gray and brown, peppered with raised dark dots cover the tops of Lithops fulviceps. Yellow flowers open in autumn.

Lithops helmutii

Lithops helmutii carries large, glassy gray-green windows on its leaf tops, which let light into the plant’s interior. Clumps form easily, and its yellow flowers have white centers.

Lithops hookeri

Lithops hookeri shows a busy, brain-like pattern of grooves in shades of rust, tan and brown. It is a common, variable species with yellow flowers.

Lithops julii

Lithops julii has pale gray to pinkish tops, frequently with a dark line along the inner edge of each leaf. The white flowers set it apart from the many yellow-flowered species.

Lithops karasmontana

Lithops karasmontana has pale, chalky tops etched with reddish or brownish lines, and several forms blush pink. It grows quickly for a lithops and produces white flowers.

Lithops lesliei

Lithops lesliei is one of the most widespread species, with dozens of named forms in rust, gray, green and brown. Detailed patterns and bright yellow flowers make it a collector favorite.

Lithops localis

Lithops localis has soft gray to pinkish tops sprinkled with tiny dots. The small heads cluster readily, and the flowers are yellow.

Getting Started with Lithops

Getting Started with Lithops

Choosing the Right Lithops

Look for firm, plump plants with no soft spots, wrinkles out of season or signs of pests. Color, pattern and size vary widely between species, and nurseries frequently sell several kinds together in one bowl. Healthy lithops sit snugly in the soil, with the leaf tops just above the surface.

Required Supplies

Four supplies cover lithops care, start to finish.

A well-draining potting mix of cactus soil blended with plenty of perlite, pumice or coarse sand carries water away from the roots.

A container with drainage holes, ideally terracotta, lets excess water escape and helps the mix dry quickly. Lithops have long taproots, and a pot at least 3 to 4 inches deep is best.

A watering tool with a narrow spout delivers water to the soil and leaves the leaf tops dry.

Bright light rounds out the list. A south- or west-facing window with several hours of direct sun, or a strong grow light, provides it.

Planting and Caring For Lithops

Planting and Caring For Lithops

Soil

Lithops need a very fast-draining, mostly mineral mix to prevent rot. Blend one part cactus potting soil with two parts pumice, perlite or coarse sand, and add crushed lava rock for even sharper drainage.

Planting

Pick a small pot with drainage holes, at least 3 to 4 inches deep for the long taproot. Fill it with the prepared mix, ease the lithops from its nursery pot, and set it at the same depth, with the leaf tops just above the surface.

Top-dress with a layer of fine gravel, which supports the plant and helps the surface dry quickly. Wait about a week before the first watering, which allows any damaged roots to heal.

Light and Temperature

Lithops Light and Temperature

Lithops need strong light to hold their compact shape and color. Aim for at least 4 to 5 hours of direct sun each day, in a south- or west-facing window. Plants in low light stretch tall and lose their markings. A move to a sunnier spot or outdoors should happen gradually over a week or two to prevent sunburn.

Lithops handle temperatures between 50 and 90°F (10 and 32°C). Dry plants tolerate brief chills, yet frost on wet soil kills them quickly.

Watering

Watering follows the plant’s yearly cycle more than the calendar. During active growth in fall, water deeply about once every two weeks, and let the soil dry out completely between waterings.

From early winter until the old leaves have fully shriveled in spring, hold off on water entirely. In late spring, water lightly about once a month, and in the heat of summer, hold off almost entirely while the plant rests.

Fertilizing

Lithops grow in nutrient-poor soil and need very little feeding. A dose of half-strength liquid cactus fertilizer once a year in fall is plenty, and many growers skip it entirely. Overfeeding causes soft, stretched, split growth.

Handling Dormancy Periods

Lithops go through two quiet phases each year, and both call for very little water.

In summer, high heat sends the plants into a rest. Water no more than a light splash once a month, and only if the leaves wrinkle badly.

Through winter and early spring, a new pair of leaves forms inside the old pair. The old leaves slowly split, wrinkle and dry into papery husks as the new leaves absorb their water and nutrients. Hold off on watering until the old leaves have completely withered, or the plant ends up with two sets of leaves stacked on top of each other.

Propagation Methods

Propagation Methods

Seed Propagation

Lithops seeds are as fine as dust. Fill small pots with a gritty seed mix and water it until damp throughout.

Scatter the seeds on the surface with no soil on top, since light helps them germinate. Cover the pots with plastic wrap, set them in a bright, warm spot out of direct sun, and mist whenever the surface dries. Seedlings appear in one to three weeks, and they take two to three years to flower.

Offset Division

Mature lithops frequently split into two or more heads over the years and form small clumps. Divide a clump at repotting time. Ease it out of the pot and gently pull the heads apart, each with its own roots. A clean, sharp knife helps where they are joined.

Let the divisions dry for a couple of days, then pot them in fresh gritty mix and water lightly after a week. They settle in within a few weeks.

Troubleshooting Common Issues

Overwatering Symptoms

Overwatered lithops swell, split open, go soft and translucent, or suddenly collapse into mush. Rot sets in quickly after that, and a rotten plant rarely recovers.

Let the soil dry completely between waterings, use a very gritty mix, and follow the yearly watering cycle. Wrinkled leaves at the wrong time of year mean thirst; wrinkled leaves in winter and spring are a normal part of the leaf change.

Pest Control

Mealybugs, aphids and spider mites occasionally attack lithops, and root mealybugs hide out of sight in the soil. Check the plants and the roots during repotting.

Dab visible mealybugs with a cotton swab dipped in rubbing alcohol, or wash pests away with a mild solution of dish soap and water applied with a soft brush. Insecticidal soap or neem oil handles larger infestations.

Disease Management

Fungal and bacterial rot nearly always start with overwatering, poor drainage or stagnant air. Gritty soil, good airflow and the correct watering rhythm prevent most problems.

At the first sign of rot, remove affected plants from shared pots right away to protect the rest. Cut away any damaged tissue with a clean knife, let the plant dry for several days, and replant it in fresh, dry mix.

Frequently Asked Questions

What soil mix is best for Lithops?

A very gritty mix, such as one part cactus soil to two parts pumice, perlite or coarse sand. Water drains through it in seconds, and the roots dry out fast.

When and how should Lithops be watered?

Water mainly in fall, when the plants grow and flower, and again lightly in late spring once the old leaves have dried up. Skip water entirely in winter and early spring, and water very little in the heat of summer.

How do you know when Lithops are ready to flower?

Lithops bloom in fall, between September and November in the Northern Hemisphere. A bud pushes up through the slit between the two leaves, then opens into a daisy-like flower that lasts about a week.

Are there any specific species of Lithops that are easier for beginners?

Lithops karasmontana and Lithops aucampiae are both forgiving, quick-growing species. Lithops lesliei is another good starter, with plenty of colorful forms.